AS2129 Table J Flange Dimensions & Standards

TABLE J				LENGTH THROUGH HUB		DRILLING DATA				TABLE J
NOMINAL PIPE SIZE		FLANGE OUTSIDE DIAMETER	THICKNESS OF FLANGE (Refer Note.3)	BOSSED SOW	WELD NECK	PITCH CIRCLE DIAMETER	BOLT HOLE DIAMETER	NUMBER OF BOLT HOLES	NOMINAL PIPE SIZE
MM	INCH	OD	T	L	L1	PCD	H	#	MM	INCH
15	1/2	115	16	26	45	83	18	4	15	1/2
20	3/4	115	16	27	45	83	18	4	20	3/4
25	1	120	19	30	48	87	18	4	25	1
32	1 1/4	135	19	30	54	98	18	4	32	1 1/4
40	1 1/2	140	22	35	57	105	18	4	40	1 1/2
50	2	165	25	38	60	127	22	4	50	2
65	2 1/2	185	25	41	63	146	22	8	65	2 1/2
80	3	205	32	48	76	165	22	8	80	3
90	3 1/2	215	32	49	76	178	22	8	90	3 1/2
100	4	230	35	54	86	191	22	8	100	4
125	5	280	38	57	95	235	26	8	125	5
150	6	305	38	57	95	260	26	12	150	6
200	8	370	41		108	324	26	12	200	8
250	10	430	48		121	381	30	12	250	10
300	12	490	51		130	438	30	16	300	12
350	14	550	57		143	495	33	16	350	14
400	16	610	64			552	33	20	400	16
450	18	675	70			610	36	20	450	18
500	20	735	79			673	36	24	500	20
550	22	785	85			724	36	24	550	22
600	24	850	92			781	39	24	600	24

NOTES:

(1) Bore sizes to suit ASME B 36.10 pipe unless otherwise specified.

(2) Raised face is the prefered configuration.

BALCOMBE ENGINEERING P/L ...03 9554 0900..... www.baleng.com.au

AS2129 Table J